PULT62630-30 Aluminum-Core PU Roller, 6 x 30 x 30 mm
PULT62630-30 is an aluminum-core polyurethane roller for OEM component sourcing, with a 6 mm bearing bore, 30 mm outside diameter and 30 mm overall axial width. Its two 626-2RS bearings and 85 Shore A tread define the catalogue configuration for this model.
Catalogue configuration
| Model | PULT62630-30 |
|---|
| Bearing bore d | 6 mm |
|---|
| Wheel outside diameter OD | 30 mm |
|---|
| Overall axial width L | 30 mm |
|---|
| Core and tread | Aluminum core with polyurethane tread |
|---|
| PU hardness | 85 Shore A |
|---|
| Bearings | Two 626-2RS chrome steel bearings |
|---|
| Closure | 2RS rubber seals on both sides |
|---|
Company catalogue photograph and reference section
Representative PULT series photograph. Confirm the supplied appearance and colour with the order.
Series reference section; d, OD and L for this model are listed above. Request the approved dimensioned drawing for final fit and tolerances.
Mounting and operating conditions
For a compact 6 mm shaft installation, check the 30 mm wheel envelope and the available bracket clearance. Specify the spacer and shaft-retention arrangement before ordering.
Confirm bearing fit, clearance, lubrication and any special tolerance requirements with the order. Supply operating conditions for load and speed selection.
Request a quotation
For a repeat-production quote, provide quantity per shipment, estimated annual volume, required packaging and delivery destination. Identify any requested change to hardness, colour or bearing specification separately from the catalogue model.
Email an enquiry for PULT62630-30.
Related mounting sizes
PULT62647-35 — 6 mm bore with a larger 47 x 35 mm wheel envelope. Different bores and wheel dimensions require a mounting check.
Browse the dual-bearing PU roller range.
