PULT680047-35 Aluminum-Core PU Roller 10x47x35mm
PULT680047-35 is an aluminum-core polyurethane roller with a 10 mm bearing bore, 47 mm wheel diameter and 35 mm axial width. Its catalogue configuration uses two 6800-2RS bearings. Use the complete model when requesting a sample or production-batch quotation.
Catalogue configuration
| Model | PULT680047-35 |
|---|
| Bearing bore d | 10 mm |
|---|
| Wheel outside diameter OD | 47 mm |
|---|
| Overall axial width L | 35 mm |
|---|
| Core and tread | Aluminum core with polyurethane tread |
|---|
| Bearings | Two 6800-2RS chrome steel bearings |
|---|
| PU hardness | 85 Shore A |
|---|
| Bearing closure | Rubber seals on both sides |
|---|
Catalogue image and reference section
Representative PULT series catalogue photo; not a model-specific photograph.
PULT series reference section for d, OD and L. Request an approved drawing for fit and tolerances.
Selection and mounting
Confirm the 10 mm shaft fit, shaft shoulders and spacers against the assembly drawing. The 47 mm running diameter and 35 mm axial envelope must be checked separately from the bore. A roller with the same outside diameter but a different bore is not automatically interchangeable.
Request a quotation
Specify trial-sample and batch quantities, required delivery country, target delivery date and packaging. Attach the assembly drawing and state operating load, speed, contact-surface material and environment. Any special clearance, tolerance or lubrication requirement needs quotation-stage confirmation.
Email a quotation request for PULT680047-35.
Related sizes
PULT62647-35 — compare the complete dimensions and bearing configuration
View the dual-bearing PU roller range
