PULT68622-50 Aluminum-Core PU Roller, 6 x 22 x 50 mm
PULT68622-50 is an aluminum-core polyurethane roller for OEM component sourcing, with a 6 mm bearing bore, 22 mm outside diameter and 50 mm overall axial width. Its two 686ZZ bearings and 85 Shore A tread define the catalogue configuration for this model.
Catalogue configuration
| Model | PULT68622-50 |
|---|
| Bearing bore d | 6 mm |
|---|
| Wheel outside diameter OD | 22 mm |
|---|
| Overall axial width L | 50 mm |
|---|
| Core and tread | Aluminum core with polyurethane tread |
|---|
| PU hardness | 85 Shore A |
|---|
| Bearings | Two 686ZZ chrome steel bearings |
|---|
| Closure | ZZ metal shields on both sides |
|---|
Company catalogue photograph and reference section
Representative PULT series photograph. Confirm the supplied appearance and colour with the order.
Series reference section; d, OD and L for this model are listed above. Request the approved dimensioned drawing for final fit and tolerances.
Mounting and operating conditions
The 50 mm axial width is the wheel envelope to check against the bracket opening. Specify the shaft fit, spacer arrangement and retention method on the assembly drawing.
Confirm bearing fit, clearance, lubrication and any special tolerance requirements with the order. Supply operating conditions for load and speed selection.
Request a quotation
For a repeat-production quote, provide quantity per shipment, estimated annual volume, required packaging and delivery destination. Identify any requested change to hardness, colour or bearing specification separately from the catalogue model.
Email an enquiry for PULT68622-50.
Related mounting sizes
PULT69522-50 — same 22 x 50 mm wheel envelope, 5 mm bore. Different bores and wheel dimensions require a mounting check.
Browse the dual-bearing PU roller range.
