PULT69847-35 Aluminum-Core PU Roller 8x47x35mm
PULT69847-35 is an aluminum-core polyurethane roller with an 8 mm bearing bore, 47 mm wheel diameter and 35 mm axial width. Its catalogue configuration uses two 698-2RS bearings. Use the complete model when requesting a sample or production-batch quotation.
Catalogue configuration
| Model | PULT69847-35 |
|---|
| Bearing bore d | 8 mm |
|---|
| Wheel outside diameter OD | 47 mm |
|---|
| Overall axial width L | 35 mm |
|---|
| Core and tread | Aluminum core with polyurethane tread |
|---|
| Bearings | Two 698-2RS chrome steel bearings |
|---|
| PU hardness | 85 Shore A |
|---|
| Bearing closure | Rubber seals on both sides |
|---|
Catalogue image and reference section
Representative PULT series catalogue photo; not a model-specific photograph.
PULT series reference section for d, OD and L. Request an approved drawing for fit and tolerances.
Selection and mounting
Confirm the 8 mm shaft fit, shaft shoulders and spacers against the assembly drawing. The 47 mm running diameter and 35 mm axial envelope must be checked separately from the bore. A roller with the same outside diameter but a different bore is not automatically interchangeable.
Request a quotation
Specify trial-sample and batch quantities, required delivery country, target delivery date and packaging. Attach the assembly drawing and state operating load, speed, contact-surface material and environment. Any special clearance, tolerance or lubrication requirement needs quotation-stage confirmation.
Email a quotation request for PULT69847-35.
Related sizes
PULT62647-35 — compare the complete dimensions and bearing configuration
View the dual-bearing PU roller range
