You are here » Bearings » Stainless Steel Bearings »Stainless Steel Ball Bearings » S16 Series Stainless Steel Bearings

S1603-2RS Stainless Steel Deep Groove Ball Bearing 5/16×7/8×0.344

S1603-2RS Stainless Steel Deep Groove Ball Bearing 5/16×7/8×0.344

S1603-2RS Stainless Steel Deep Groove Ball Bearing 5/16×7/8×0.344

S1603-2RS is a 440C stainless steel deep groove ball bearing with a 5/16 x 7/8 x 0.344 inch bore x outside diameter x width. The supplied configuration has two rubber seals, designated 2RS. Specify both the inch dimensions and 440C material when requesting an OEM quotation.

Product specification in inches

ModelS1603-2RS
Bearing typeDeep groove ball bearing
MaterialAISI 440C stainless steel
Bore d (inch)5/16
Outside diameter D (inch)7/8
Width B (inch)0.344
Closure2RS; rubber seals on both sides

Product images

Stainless steel ball bearings.png

S1603-2RS Stainless Steel Deep Groove Ball Bearing 5/16×7/8×0.344.jpg

S1603-2RS Stainless Steel Deep Groove Ball Bearing 5/16×7/8×0.344.jpg

Bearing type-1.jpg

What to confirm for an OEM order

Match the bore, outside diameter and width to the assembly drawing. Confirm shaft and housing fits, required internal clearance, accuracy, lubricant and operating conditions before ordering. The model and boundary dimensions alone do not establish a fit or performance rating.

For an inch stainless steel bearing with two rubber seals, keep the 2RS configuration on the order. A ZZ shielded or open bearing is a different closure and needs a separate selection check.

Request a configuration-matched quotation

Send S1603-2RS, quantity, the shaft and housing drawing, required clearance and accuracy, lubricant requirements and delivery destination. Ask for the matching drawing and confirmation of packing, stock and lead time with the quotation.

Email your S1603-2RS requirements or use the inquiry entrance on this page.

Compare related stainless steel bearings.